Adjust Image Quality - Toshiba e-STUDIO477S Service Manual

(2) Press the [ADMIN] button, enter the password, and then press the [ENTER] button.
Notes:
Explain the user (machine administrator) about the next operation and ask him/her to enter his/
her password.
(3) Press the [FAX] button and then the [TERMINAL ID] button to set each item.
(4) Press the [INITIAL SETUP] button to set each item.
[I]

Adjust image quality

(1) Start up with the Adjustment mode (05).
(2) Enter the password, and then press the [OK] button.
(If the password is not set for Service, press the [ENTER] button without entering anything.)
(3) Perform "Automatic gamma adjustment" (05-7165).
 P. 4-4 "4.2.1 Automatic gamma adjustment"
(4) Turn the power OFF.
© 2013-2016 TOSHIBA TEC CORPORATION All rights reserved
6 - 17
e-STUDIO477S/527S/477SL
REPLACEMENT OF PC BOARDS/HDD
6