Toshiba e-STUDIO477S Service Manual page 381

e-STUDIO477S/527S
05/08 Mode Element Sub Element
08 Setting Image Image
mode Processing
08 Setting Image User interface
mode Processing
08 Setting Image Image
mode Processing
08 Setting Image Image
mode Processing
08 Setting Image Image
mode Processing
08 Setting Image User interface
mode Processing
08 Setting System General
mode
08 Setting System General
mode
08 Setting System General
mode
08 Setting System General
mode
08 Setting System General
mode
08 Setting System General
mode
08 Setting System General
mode
08 Setting Mode
Item Subitem Code
All clearing Adjustment values 7400
of all 05/08 image
process codes
User custom NW SCN 7401
mode setting
All clearing Adjustment values 7500
of all 05 image
process codes
FAX (black) Image quality 7501
switchover
FAX (black) Image quality 7501
switchover
User custom NW SCN 8303
mode setting
8504
8511
8512
8514
Outside erase 8515
Judgment
threshold
(Default)
Outside erase 8516
Judgment
threshold
(Default)
8517
Sub- Default
Details
Code value
NW SCN related codes
Black 0
FAX related codes
0 Primary scanning direction 1
1 Secondary scanning 1
direction
Color 0
Feeding method of odd 0
page number in duplex
printing (Raw print)
Wide A4 Mode (for PCL) 0
Number of jobs in batch 10
processing
Threshold value setting for 20
RIP standard paper
judgment
PPC 0
SCN 0
Remote Scan User 1
authentication automatic
login
28
Acceptable
RAM Contents
value
SYS Clears the values of the following codes:
clear 05-7430 to 7489
05-8304 to 8380
08-7401, 8303
0~3 SYS 0: Unused
1: Black TEXT/PHOTO base
2: Black TEXT base
3: Black PHOTO base
SYS Clears the values of the following codes:
05-7533 to 7543
0~1 SYS 0: Suppresses graininess 1: Suppresses smudge
0~1 SYS 0: Suppresses graininess 1: Dimensional
accuracy priority
0~4 SYS 0: Unused
1: Text/Photo base
2: Text base
3: Photo base
4: e-document base
* e-document: This is the mode that corresponds
to the law in Japan. This mode is used to clarify
area where changes were made with such as a
correction fluid.
0~1 SYS 0: One side
1: Both sides
0~1 SYS 0: Disable 1: Enable
2~10 SYS 2-10: From 2 to jobs can be specified
5~30 SYS This code is used for changing the range in which
non-standard paper sizes are judged as standard
ones. If the page size data are within the standard
paper size ± the setting value, the page size is
judged as a standard paper size in PS/PDF
printing. If the page size data are out of the range,
the page size is judged as a non-standard paper
size. The unit for the setting value is PS points. 1
PS point is approx. 0.35 mm.
-3~3 SYS The larger the value, area to be erased increases.
The smaller the value, area to be erased
decreases.
-3~3 SYS The larger the value, area to be erased increases.
The smaller the value, area to be erased
decreases.
0~1 SYS 0: OFF
(A user always enters manually (current method))
1: ON
(Previous authentication information will be used)
Proc
ServiceUI
edure
3
1 Yes
3
4
4
1 Yes
1
1
1
1 Yes
1
1
1
Ver03