Toshiba e-STUDIO477S Service Manual page 349

e-STUDIO477S/527S
05/08 Mode Element Sub Element
05 Adjustment Image Gamma
mode Processing balance
adjustment
05 Adjustment Image Image
mode Processing
05 Adjustment Image Density
mode Processing adjustment
05 Adjustment Image Density
mode Processing adjustment
05 Adjustment Image Density
mode Processing adjustment
05 Adjustment Image Density
mode Processing adjustment
05 Adjustment Image Density
mode Processing adjustment
05 Adjustment Image Blank page
mode Processing judgment
threshold
adjustment
05 Adjustment Image ACS judgment
mode Processing threshold
05 Adjustment Image Stroke
mode Processing adjustment
05 Adjustment Mode
Item Subitem Code
SCN(black) Gray scale 7488
NW scanning 7489
FAX(black) Manual 7533
adjustment/Center
value
FAX(black) Manual 7534
adjustment/Center
value
FAX(black) Manual 7535
adjustment/Center
value
FAX(black) Automatic density 7542
adjustment
FAX(black) Automatic density 7543
adjustment
7618
7630
PS/PDF 600dpi 8239
automatic stroke
adjustment
Sub- Default
Details
Code value
2 High density 128
Amount of surrounding void 0
Text/photo 128
Text 128
Photo 128
Text/photo 128
Photo 128
PPC/SCN 128
PPC/SCN 70
0 Default setting 1
9
Acceptable
RAM Contents
value
0~255 SYS The larger the value, the darker the image of the
area surrounding the target area becomes.
0~255 SYS When the value increases, the blank area around
the scanned image becomes wider. (e.g.: In
network scanning with 600 dpi, if the setting value
is "1", the blank area increases by 1 dot.)
0~255 SYS The larger the value, the darker the image at the
center value becomes.
0~255 SYS The larger the value, the lighter the image at the
center value becomes.
0~255 SYS The larger the value, the darker the image at the
center value becomes.
0~255 SYS The larger the value, the darker the image
becomes.
0~255 SYS The larger the value, the darker the image
becomes.
0~255 SYS The larger the value, the more the original tends to
be judged as a blank page.
0~255 SYS The larger the value, the more the original tends to
be judged as black even in the auto color mode.
The smaller value, the more it tends to be judged
as color.
0~3 SYS This code is used to change the width of fine lines
in PS and PDF printing. Automatic stroke
adjustment is the function that prevents the width
from changing according to the position.
This code sets whether automatic stroke
adjustment is enabled or disabled if it is not
included in the print data. If this setting is disabled,
there will be an increase in cases in which the
width of fine lines becomes thicker by 1 dot when
they are printed.
0: Disabled
1: Enabled
2: Forcibly disabled (Ignores command in printing
data)
3: Forcibly enabled (Ignores command in printing
data)
Proc
ServiceUI
edure
4
1 Yes
1
1
1
1
1
1 Yes
1 Yes
4
Ver03