Toshiba e-STUDIO477S Service Manual page 361

e-STUDIO477S/527S
05/08 Mode Element Sub Element
08 Setting System Network
mode
08 Setting System Network
mode
08 Setting System Network
mode
08 Setting System General
mode
08 Setting Counter Extra long size
mode paper count
08 Setting Counter Extra long size
mode paper count
08 Setting System General
mode
08 Setting System General
mode
08 Setting System Scanning
mode
08 Setting System Network
mode
08 Setting Mode
Item Subitem Code
IPv6 3781
IPv6 3782
3793
3797
Count switching 3800
setting
Count switching 3800
setting
USB media 3802
direct printing
USB media 3803
direct printing
3805
Intranet Fax Sender e-mail 3809
address
Sub- Default
Details
Code value
Primary DNS Server
Address Registration
Secondary DNS Server
Address Registration
LLTD function setting 1
PJL USTATUS setting 1
0 461-800 mm 2
1 801-1320 mm 3
Paper size Refer to
contents
Enable/disable setting 1
Department Management 3
setting by Remote Scan
Mixed transmission
8
Acceptable
RAM Contents
value
- Registration of Primary DNS Server Address.
Maximum 40 characters (byte).
- Registration of Secondary DNS Server Address.
Maximum 40 characters (byte).
1~2 NIC Sets the LLTD function.
1: Enabled
2: Disabled
0~1 SYS Sets whether to remain or initialize the PJL
USTATUS setting for each job.
0: Remaining
1: Initialized
* This setting is available only when SNMP
communication is performed.
1~30 SYS Sets the number of multiples. A sheet is counted
as N sheets when extra long size paper is used for
printing.
1~30 SYS Sets the number of multiples. A sheet is counted
as N sheets when extra long size paper is used for
printing.
1,2,6,7,10~ SYS 1: legal 2: letter 6: A4 7: A5 10: B5 11: Folio 12:
13 Legal13" 13: LetterSquare
<Default value>
NAD: 2
Others: 6
0~1 SYS Sets the USB media direct printing function.
0: Disabled 1: Enabled
0~3 SYS Sets the department management with remote
scanning as follows:
0: w/o GUI OFF, w/ GUI OFF
1: w/o GUI ON, w/ GUI OFF
2: w/o GUI OFF, w/ GUI ON
3: w/o GUI ON, w/ GUI ON
w/o GUI:
Remote scanning is operated on SSOP application
of eCOPY Inc.
w/ GUI:
Remote scanning is operated on TTEC-specific
GUI.
This setting is only for department management
with remote scanning. When GUI is set ON, a
department code dialog is displayed at the start-up
of remote scanning. This code is valid only when
the code 08-9120 is set "1 (Valid)".
Refer to - When "2" is selected in 08-3810 (Internet and
contents Intranet Faxes are mixed), the address entered in
this code is used as the one for the Intranet Fax
sender.
Maximum 192 characters
* Once the HDD clearance has been performed,
the default value is set.
Proc
ServiceUI
edure
12
12
12
1
4 Yes
4 Yes
1
1
1
12
Ver03