Test Print Mode (Test Mode 04) - Toshiba e-STUDIO477S Service Manual

3.5

Test print mode (test mode 04)

The embedded test pattern can be printed out in the test print mode (04).
<Procedure 1>
[0][4]
(Code)
[POWER]
Notes:
• When an error occurs, it is indicated on the panel, but the recovery operation is not performed.
Turn OFF the power and then back ON to clear the error.
• During test printing, the [CLEAR] button is disabled when "Wait adding toner" is displayed.
e-STUDIO477S/527S/477SL
SELF-DIAGNOSTIC MODE
(Media selection)
[START]
3 - 10
Operation [CLEAR]
Continuous
Test Printing
© 2013-2016 TOSHIBA TEC CORPORATION All rights reserved
[POWER]
OFF/ON
(Exit)