Toshiba e-STUDIO477S Service Manual page 328

[F] Reset "FUNCTION LIST FOR MAINTENANCE"
(1) Print out the "FUNCTION LIST FOR MAINTENANCE" list after the formatting.
(2) While pressing [1] and [3] simultaneously, turn the power ON. (Function Mode)
(3) Compare the lists which were printed before and after the formatting to check the setting items
having the different setting values. Set the value which was set before the formatting
Turn the power OFF.
(4) Turn the power OFF.
[G] Reset "FUNCTION" list
Reset the fax function by referring to the "function list" that was printed out in  P. 9-9 "[C] Print out
"FUNCTION" list".
(1) Press the [USER FUNCTIONS] button.
(2) Press the [ADMIN] button, enter the password, and then press the [ENTER] button.
(3) Press the [FAX] button and then the [TERMINAL ID] button to set each item.
(4) Press the [INITIAL SETUP] button to set each item.
Notes:
Explain to the user (machine administrator) about the next operation and ask him/her to enter
his/her password.
[H] Check actuation of data encryption function setting
Check if the data encryption function is in operation.
Press the [COUNTER] button on the control panel. If a key-shaped icon is displayed at the top right of
the screen, the data encryption function is in operation.
e-STUDIO477S/527S/477SL
BACKUP FUNCTION
Fig.12-2
© 2013-2016 TOSHIBA TEC CORPORATION All rights reserved
9 - 10