Toshiba e-STUDIO477S Service Manual page 350

e-STUDIO477S/527S
05/08 Mode Element Sub Element
05 Adjustment Image Stroke
mode Processing adjustment
05 Adjustment Image Stroke
mode Processing adjustment
05 Adjustment Image Stroke
mode Processing adjustment
05 Adjustment Image Line width
mode Processing minimum value
adjustment
05 Adjustment Image Line width
mode Processing minimum value
adjustment
05 Adjustment Image Line density
mode Processing adjustment
05 Adjustment Image Line density
mode Processing adjustment
05 Adjustment Image Line density
mode Processing adjustment
05 Adjustment Mode
Item Subitem Code
PS/PDF 600dpi 8239
automatic stroke
adjustment
PS/PDF 1200dpi 8239
automatic stroke
adjustment
PS/PDF 1200dpi 8239
automatic stroke
adjustment
NW PRT 8240
PRT color 8241
NW PRT 1200dpi 8242
PRT color 1200dpi 8243
PRT color 1200dpi 8243
Sub- Default
Details
Code value
1 Minimum stroke width when 1
disabled
2 Default setting 1
3 Minimum stroke width when 1
disabled
600dpi 1
1200dpi 4
0 Gray (K) 4
0 Gray (K) lower limit value 1
1 Gray (K) upper limit value 200
10
Acceptable
RAM Contents
value
1~2 SYS This code is used to change the width of fine lines
in PS and PDF printing. Automatic stroke
adjustment is the function that prevents the width
from changing according to the position.
This code sets the minimum width of fine lines
when the automatic stroke adjustment is disabled.
For example, if automatic stroke adjustment is
disabled and the width of fine lines is set to "0" in
the PS command, the width of the lines becomes 1
dot if the value of this code is set to "1"; equally, if it
is set to "2", the width of the lines becomes 2 dots.
1: 1 dot
2: 2 dots
0~3 SYS This code is used to change the width of fine lines
in PS and PDF printing. Automatic stroke
adjustment is the function that prevents the width
from changing according to the position.
This code sets whether automatic stroke
adjustment is enabled or disabled if it is not
included in the print data. If this setting is disabled,
there will be an increase in cases in which the
width of fine lines becomes thicker by 1 dot when
they are printed.
0: Disabled
1: Enabled
2: Forcibly disabled (Ignores command in printing
data)
3: Forcibly enabled (Ignores command in printing
data)
1~2 SYS This code is used to change the width of fine lines
in PS and PDF printing. Automatic stroke
adjustment is the function that prevents the width
from changing according to the position.
This code sets the minimum width of fine lines
when the automatic stroke adjustment is disabled.
For example, if automatic stroke adjustment is
disabled and the width of fine lines is set to "0" in
the PS command, the width of the lines becomes 1
dot if the value of this code is set to "1"; equally, if it
is set to "2", the width of the lines becomes 2 dots.
1: 1 dot
2: 2 dots
1~9 SYS The larger the value, the darker the fine lines
become.
1~9 SYS The larger the value, the darker the fine lines
become.
0~5 SYS The larger the value, the darker the fine lines
become.
0~255 SYS Specifies the effective density range of 05-8242
from 0 to 255.
0~255 SYS Specifies the effective density range of 05-8242
from 0 to 255.
Proc
ServiceUI
edure
4
4
4
1 Yes
1
4
4
4
Ver03