Toshiba e-STUDIO477S Service Manual page 366

e-STUDIO477S/527S
05/08 Mode Element Sub Element
08 Setting Printer Feeding
mode system/Paper
transport
08 Setting Printer General
mode
08 Setting Printer General
mode
08 Setting Counter Double count
mode
08 Setting Counter Double count
mode
08 Setting Counter Printer
mode
08 Setting Counter Printer
mode
08 Setting Mode
Item Subitem Code
Paper size setting PPC 4140
4160
4161
For fee charging Paper size 6010
For fee charging Paper size 6011
Black 6064
Black 6064
Sub- Default
Details
Code value
Bypass feed Refer to
contents
Silent control setting 0
Nearly end setting of drum 1
Large-sized paper Refer to
contents
Definition setting of large 0
sized paper
0 Large 0
1 Small 0
13
Acceptable
RAM Contents
value
0~153 SYS Press the button on the LCD to select the size.
255: UNDEF
<Default value>
NAD: 80 (LT-R)
Others: 20 (A4-R)
0~1 PU Switches ON/OFF of low speed printing mode to
reduce the printing noise.
0: OFF
1: ON
1~6 PU Sets the occurrence timing of nearly end of drum
(replacement timing is close). Set the available
number of sheets prior to replacement timing (end
of life).
1: 0.5K 2: 1K 3: 2K 4: 3K 5: 4K 6: 5K
0~1 SYS Sets whether LargeCounter is counted as 1 or 2
when printing large-sized paper.
0: Counted as 1
1: Counted as 2
* This code is a special code which has areas in
both SYS-SRAM and PU. The default value in
SYS-SRAM is applied to the PU area at
initialization.
<Default value>
JPD: 0
Others: 1
0~2 SYS Sizes that classified into Large.
0: A3, LD, Undefined, Custom size that exceeds
415 mm (including Long-a, Long-b)
1: In addition to the paper sizes listed in "0", B4
(364mm), Folio (330 mm), 14"LG (356 mm),
13.5"LG (343 mm), 13"LG (330 mm), Computer
(356mm), Custom size that exceeds 325 mm
2: B4 (364mm), Custom size that exceeds 356 mm
(including Long-a, Long-b)
* This code is a special code which has areas in
both SYS-SRAM and PU. The default value in
SYS-SRAM is applied to the PU area at
initialization.
0~9999999 SYS Counts the number of output pages at the Black
9 Mode in the Printer Function according to its size
(large/small).
Large:
Number of output pages of large-sized paper
defined at 08-6011
Small:
Number of output pages other than set as large-
sized paper
0~9999999 SYS Counts the number of output pages at the Black
9 Mode in the Printer Function according to its size
(large/small).
Large:
Number of output pages of large-sized paper
defined at 08-6011
Small:
Number of output pages other than set as large-
sized paper
Proc
ServiceUI
edure
9
1
1
1 Yes
1 Yes
14
14
Ver03