[2E66] Hdd Full Failure In Usb Storage; [2Ec1] Power Failure In Usb Storage - Toshiba e-STUDIO477S Service Manual

[2E40] Image conversion abnormality in USB storage
Turn the power OFF and then back ON. Perform the job in error again. Replace the main memory
and then perform the job in error again.
[2E43] Encryption failure in USB storage
Turn the power OFF and then back ON. Perform the job in error again.
[2E44] Encryption PDF enforced mode error in USB storage
Reset the encryption and perform the job in error again. To create an image file not encrypted,
consult your administrator.
[2E45] Meta data creation error in USB storage (Scan to File)
Check the template settings. Perform the job in error again. If the error still occurs, turn the power
OFF and then back ON, and then perform the job in error again.
[2E65] File creation error due to insufficient USB folder capacity
Delete unnecessary files in the folder.

[2E66] HDD full failure in USB storage

Delete the job in progress or being set or in the HOLD/PRIVATE/PROOF/INVALID, and perform it
again.
Check if the server or local disk has a sufficient space in disk capacity.
Check that there is enough space in the USB memory.

[2EC1] Power failure in USB storage

Check if the power cable is connected properly and inserted securely. Check if the power voltage is
unstable.
e-STUDIO477S/527S/477SL
ERROR CODE AND TROUBLESHOOTING
© 2013-2016 TOSHIBA TEC CORPORATION All rights reserved
5 - 80