Toshiba e-STUDIO477S Service Manual page 418

e-STUDIO477S/527S
05/08 Mode Element Sub Element
08 Setting System Feeding
mode system/Paper
transport
08 Setting System Feeding
mode system/Paper
transport
08 Setting System Feeding
mode system/Paper
transport
08 Setting System Network
mode
08 Setting System Network
mode
08 Setting System Network
mode
08 Setting System Network
mode
08 Setting Mode
Item Subitem Code
Paper information 9304
Paper information 9305
Size conversion 9306
Print Retention period 9307
Print Raw printing job 9308
Print Raw printing job 9309
Print Raw printing job 9310
Sub- Default
Details
Code value
LCF 0
Bypass tray 0
LT <-> A4 / LD <-> A3 0
Storage period at trail and 14
private
Duplex 1
Paper size Refer to
contents
Paper type 0
65
Acceptable
RAM Contents
value
Refer to SYS 0: Plain paper
contents 1: Thick paper 1
2: Thick paper 2
3: Thick paper 3
4: Thick paper 4
11: Plain paper (Thin)
80: UserType paper 1
81: UserType paper 2
82: UserType paper 3
83: UserType paper 4
84: UserType paper 5
* Do not set the paper type that is not supported.
<Acceptable value>
0-4, 11, 80-84
Refer to SYS 0: Plain paper 1: Thick paper 1 2: Thick paper 2
contents 3: Thick paper 3 4: Thick paper 4 11: Plain paper
(Thin) 13: Thick paper 5 18: Special paper
3(Transparency) 32: Envelop paper 1 33: Envelop
paper 2 34: Envelop paper 3 35: Envelop paper 4
64: Special paper 1(Label1) 65: Special paper
2(Label2) 80: UserType paper 1 81: UserType
paper 2 82: UserType paper 3 83: UserType
paper 4 84: UserType paper 5
* Do not set the paper type that is not supported.
<Acceptable value>
0-4, 11, 13, 18, 32-35, 64-65, 80-84
0~1 SYS Sets whether the data is printed on the different but
similar size paper or not when the paper of
corresponding size is not available.
0: Valid (The data is printed on A4/A3 when LT/LD
is selected or vice versa.)
1: Invalid (The message to use the selected paper
size is displayed.)
0~53 SYS 0: No limits
1 to 30: 1 to 30 days
31: 1 hour 32: 2 hours 33: 4 hours 34: 8 hours
35: 12 hours 50: 5 min. 51: 10 min. 52: 15 min.
53: 30 min.
0~1 SYS 0: Valid
1: Invalid
Refer to SYS 1: LG 2: LT 4: ST 6: A4 7: A5 8: A6 10: B5 11:
contents FOLIO 12: 13"LG 13: 8.5" x 8.5" 14: Postcard
<Default value>
NAD: 2
Others: 6
<Acceptable value>
1-2, 4, 6-8, 10-14
Refer to SYS 0: Plain paper
contents 1: Thick paper 1
2: Thick paper 2
3: Thick paper 3
5: Thick paper 4
6: Plain paper(Thin)
10: Thick paper 5
<Acceptable value>
0-3, 5-6, 10
Proc
ServiceUI
edure
1
1
1
1 Yes
1
1
1
Ver03