By setting a search method according to instructions in the screen of printer search procedures and clicking
the [Discovery] button, printer search is started. Then, the status of setting area of printer search conditions
changes into the following status, and discovered printers are displayed sequentially in the listing area of
discovered printers.
By clicking the [End Discovery] while searching for printers, printer search is terminated.
(Printers discovered before termination of printer search stay displayed in the listing area of discovered printers.)
The following window shows an example of the results of a printer search conducted for the specified
network.
Input IP address
If you enter "10.49.60.255"at IP address, all printers that correspond to IP addresses
"10.49.60.1"~"10.49.60.254"will be searched.
Maintenance Utility Operating Manual 42678819FU02 - 8/38