Toshiba e-STUDIO477S Service Manual page 458

Click [OK] in the download confirmation window to download the saved PU board setting value.
(The download operation may take several minutes. Do not perform any operation until the download
operation is completed.)
When the PU board setting value is successfully downloaded, the download completion window shown
below appears.
Click [OK] in the download completion window to display the following message.
After data downloading, Click the [Finish] button on the "PU board replacement - Download" screen to
delete PU board setting value, disconnect the printer connected and return to "PU board replacement -
Menu" screen.
Restarting the printer
Restart the printer using the On/Off switch on the printer unit to enable the downloaded PU board setting
value.
Downloading. Wait.
PU board setting value downloading finished correctly.
If you click [Finish], the downloaded PU board setting value is deleted, the
printer is disconnected, and you will return to the "PU board replacement -
Menu".
Maintenance Utility Operating Manual 42678819FU02 - 22/38