Erase Hdd; Replace / Format Hdd - Toshiba e-STUDIO477S Service Manual

Multifunctional digital systems
Hide thumbs Also See for e-STUDIO477S:
Table of Contents

Advertisement

[C] Print out "FUNCTION" list
(1)
Press the [USER FUNCTIONS] button.
(2)
Press the [ADMIN] button, enter the password, and then press the [ENTER] button.
Notes:
Explain the procedure to the user (machine administrator) and ask him/her to enter his/her
password.
(3)
Press the [LIST/REPORT] button and then the [LIST] button.
(4)
Press the [FUNCTION] button. The "FUNCTION LIST FOR MAINTENANCE" is printed out.
[D] Erase HDD
In case of the ADI-HDD:
(1)
Turn the power ON while pressing [4] and the [CLEAR] button simultaneously.
(2)
Key in [1] to select "1: Revert factory install status HDD." and then press the [START] button.
(3)
Turn the power OFF.
[E] Replace / Format HDD
(1)
Confirm that the power is turned OFF.
(2)
Replace the HDD.
(Refer to  P. 6-5 "6.1.4 Hard disk (HDD)".)
(3)
Create the partitions on the HDD.
1.Turn the power ON while pressing [3] and [CLEAR] button simultaneously.
2.When "Firmware Assist Mode" appears on the LCD, key in [3] to select "3: Format HDD" and
then press the [START] button.
3.When "Operation Complete" is displayed on the LCD, creating of the partitions is completed.
(4)
Turn the power OFF.
(5)
Format the service tech password.
1. Turn the power ON while pressing [3] and the [CLEAR] button simultaneously.
2. When "Firmware Assist Mode" appears on the LCD, key in [8] to select "8. Clear Service Tech
Password" and then press the [START] button.
3. When "Reset Complete" is displayed on the LCD, formatting of the service tech password is
completed.
(6)
Turn the power OFF.
(7)
Update the system software using the USB device.
See "8.2Firmware Updating with a USB Device" for details.
(8)
Turn the power OFF.
(9)
When the Fax Unit (GD-1340) is installed, perform "Fax Set Up" (1*-100) and "Clearing the
image data" (1*-102). Then turn the power OFF.
Notes:
When "Clearing the image data" (1* - 102) is performed, the image data in the printer will also be
cleared.
(10) Start up with the Setting mode (08).
© 2013-2016 TOSHIBA TEC CORPORATION All rights reserved
6 - 15
e-STUDIO477S/527S/477SL
REPLACEMENT OF PC BOARDS/HDD
6

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

E-studio527sE-studio477sl

Table of Contents