Toshiba e-STUDIO477S Service Manual page 430

e-STUDIO477S/527S
05/08 Mode Element Sub Element
08 Setting System Counter
mode
08 Setting System Maintenance
mode
08 Setting System Maintenance
mode
08 Setting System Maintenance
mode
08 Setting System Maintenance
mode
08 Setting System Maintenance
mode
08 Setting System Network
mode
08 Setting System User control
mode
08 Setting System Process
mode
08 Setting System Version
mode
08 Setting System Version
mode
08 Setting System Version
mode
08 Setting Mode
Item Subitem Code
9787
9788
Remote- 9793
controlled service
Remote- 9794
controlled service
Remote- 9795
controlled service
Remote- 9796
controlled service
9798
Local 9799
authentication
9804
Printer 9806
Printer ROM version of 9807
printer optional
tray
Printer ROM version of 9807
printer optional
tray
Sub- Default
Details
Code value
Suspend when quota is 0
empty
Service call checking period 6
setting
Service Notification setting 0
Destination E-mail address 1
Total counter information 0
transmission setting
Total counter transmission 0
date setting
Temporary communication 99999
password setting
Switchover of mode 0
Forcible mode change in 0
toner empty status
Firmware version of printer
loader section
0 Tray2
1 Tray3
77
Acceptable
RAM Contents
value
0~1 SYS Sets whether the process is suspended
immediately or suspended after the job is
completed if quota is used up.
0: Suspended immediately
1: Suspended after the job is finished
0~12 SYS 0: No checking period specified (= Calls service
technician immediately)
1: 10 minutes
2: 30 minutes
3: 1 hour
4: 6 hours
5: 12 hours
6: 24 hours
7: 48 hours
8: 7 days
9: 1 month
10: 1 year
11: 5 years
12: Not limited (= Calls service technician if such
error has occurred in the past even once or more)
0~2 SYS Enables to set up to 3 E-mail addresses to be sent.
(08-9794, 9607, 9608)
0: Invalid
1: Valid (E-mail)
2: Valid (FAX)
SYS Maximum 192 letters
0~1 SYS 0: Invalid
1: Valid
0~31 SYS 0 to 31
SYS Sets a temporary communication password. The
password can be entered in alphanumeric
characters (A to Z, a to z, 0 to 9) up to 10 digits.
The entered password is displayed with "*" on the
touch panel and the self-diagnostic lists.
(Maximum 10 digits, minimum 5 digits)
0~1 SYS Sets the authentication mode when "0: (Internal
authentication)" is selected in the code 08-9293.
0: Card ID differs from the User ID
1: Card ID is the same as the User ID
0~2 SYS 0: SLEEP MODE
1: AUTO POWER SAVE
2: READY
-
00.00.00~F -
F.FF.FF
00.00.00~F -
F.FF.FF
Proc
ServiceUI
edure
1
1
1
11
1
1
11
1
1
2
14
14
Ver03