Line connection
4.9 Active Interface Module
4.9.5
Installation
The Active Interface Modules are designed for installation in the control cabinet. The
components are secured onto the control cabinet installation panel next to the line filter using
four M6 screws (not hexagon-head screws).
Figure 4-26
Table 4-24
Protective conductor connection
Active Interface Module
55 kW
80 / 120 kW
80
Mounting: Active Interface Module
Threaded hole M6 / 6 Nm
Threaded hole M8 / 13 Nm
Booksize cold-plate power units
Manual, (GH4), 03.2007, 6SL3097-2AJ00-0BP4