Software Upgrade; Loading Auxiliary Files - AudioCodes Mediant 3000 User Manual

User's Manual
41

Software Upgrade

The Software Update menu allows you to do the following:

Load Auxiliary Files (see 'Loading Auxiliary Files' on page 525)

Load Software License Key (see 'Software License Key' on page 542)

Upgrade Device using Software Upgrade Wizard (see 'Software Upgrade Wizard' on
page 546)

Load / save Configuration File (see 'Backing Up and Loading Configuration File' on
page 551)
41.1

Loading Auxiliary Files

Various Auxiliary files can be installed on the device. These Auxiliary files provide the
device with additional configuration settings. The table below lists the different types of
Auxiliary files:
File
INI Configures the device. The Web interface enables practically full device
provisioning. However, some features may only be configured by ini file or you
may wish to configure your device using the ini file. For more information on
using the ini file to configure the device, see 'INI File-Based Management' on
page 99.
CAS CAS auxiliary files containing the CAS Protocol definitions for CAS-terminated
trunks (for various types of CAS signaling). You can use the supplied files or
construct your own files. Up to eight different CAS files can be installed on the
device. For more information, see CAS Files on page 530.
Call Progress Region-specific, telephone exchange-dependent file that contains the Call
Tones Progress Tones (CPT) levels and frequencies for the device. The default CPT
file is U.S.A. For more information, see 'Call Progress Tones File' on page
527.
Prerecorded The Prerecorded Tones (PRT) file enhances the device's capabilities of
Tones playing a wide range of telephone exchange tones that cannot be defined in
the CPT file. For more information, see Prerecorded Tones File on page 529.
Dial Plan Provides dialing plans, for example, to know when to stop collecting dialed
digits and start forwarding them or for obtaining the destination IP address for
outbound IP routing. For more information, see 'Dial Plan File' on page 530.
User Info The User Information file maps PBX extensions to IP numbers. This file can
be used to represent PBX extensions as IP phones in the global 'IP world'. For
more information, see 'User Information File' on page 536.
AMD Sensitivity Answer Machine Detector (AMD) Sensitivity file containing the AMD
Sensitivity suites. For more information, see AMD Sensitivity File on page
539.
The Auxiliary files can be loaded to the device using one of the following methods:

Web interface.

TFTP: This is done by specifying the name of the Auxiliary file in an ini file (see
Auxiliary and Configuration Files Parameters) and then loading the ini file to the
device. The Auxiliary files listed in the ini file are then automatically loaded through
Version 6.6
Auxiliary Files
Description
525
41. Software Upgrade
Mediant 3000