Configuring Server For Media Quality Of Experience - AudioCodes Mediant 3000 User Manual

13.8

Configuring Server for Media Quality of Experience

The device can be configured to report voice (media) quality of experience to AudioCodes
Session Experience Manager (SEM) server, a plug-in for AudioCodes EMS. The reports
include real-time metrics of the quality of the actual call experience and processed by the
SEM.
Notes:

To configure QoE reporting of media:
1. Open the Media Quality of Experience page (Configuration tab > VoIP menu >
Media submenu > Media Quality of Experience).
2. Configure the parameters as required
•
'Server Ip' (QOEServerIP) - defines the IP address of the SEM server
•
'Port' (QOEPort) - defines the port of the SEM server
•
'Interface Name' (QOEInterfaceName) - defines the device's IP network interface
on which the SEM reports are sent
•
'Use Mos LQ' (QOEUseMosLQ) - defines the reported MOS type (listening or
conversational)
3. Click Submit to apply your changes.
4. To save the changes to flash memory, see 'Saving Configuration' on page 520.
User's Manual
•
To support this feature, the device must be installed with the relevant
Software License Key.
•
To configure the parameters to report and their thresholds per Media
Realm, see 'Configuring Quality of Experience per Media Realm' on page
197.
•
For information on the SEM server, refer to the EMS User's Manual.
Figure 13-18: Media Quality of Experience Page
202
Mediant 3000
Document #: LTRT-89729