Creating A Login Welcome Message - AudioCodes Mediant 3000 User Manual

User's Manual
4.1.9

Creating a Login Welcome Message

You can create a Welcome message box that is displayed on the Web Login page for
logging in to the Web interface. The figure below displays an example of a Welcome
message:
Figure 4-22: User-Defined Web Welcome Message after Login
To enable and create a Welcome message, use the WelcomeMessage table ini file
parameter. If this parameter is not configured, no Welcome message is displayed.
Parameter
[WelcomeMessage]
Version 6.6
ini File Parameter for Welcome Login Message
Enables and defines a Welcome message that appears on the Web
Login page for logging in to the Web interface.
The format of this parameter is as follows:
[WelcomeMessage]
FORMAT WelcomeMessage_Index = WelcomeMessage_Text;
[\WelcomeMessage]
For Example:
[WelcomeMessage ]
FORMAT WelcomeMessage_Index = WelcomeMessage_Text;
WelcomeMessage 1 = "*********************************";
WelcomeMessage 2 = "********* This is a Welcome message **";
WelcomeMessage 3 = "*********************************";
[\WelcomeMessage]
Each index row represents a line of text in the Welcome message box.
Up to 20 lines (or rows) of text can be defined.
Description
65
4. Web-Based Management
Mediant 3000