Installing Software License Key Using Bootp/Tftp - AudioCodes Mediant 3000 User Manual

User's Manual
4. Verify that the Software License Key was successfully installed, by doing one of the
following:
•
In the Software Upgrade Key Status page, check that the listed features and
capabilities activated by the installed Software License Key match those that
were ordered.
•
Access the Syslog server and ensure that the following message appears in the
Syslog server:
"S/N___ Key Was Updated. The Board Needs to be Reloaded with ini file\n"
5. Reset the device; the new capabilities and resources enabled by the Software License
Key are active.
Note:

41.2.2.2 Installing Software License Key using BootP/TFTP

The procedure below describes how to install a Software License Key using AudioCodes
AcBootP utility.
Notes:

To install a Software License Key using the AcBootP utility:
1. Change the file extension name of the Software License Key file from .txt to .ini.
2. Place the Software License Key file in the same folder in which the device's cmp file is
located.
3. Start the AcBootP utility.
4. Click the Client Configuration tab, and then from the 'INI File' drop-down list, select
the Software License Key file.
5. From the 'BootP File' drop-down list, select the device's cmp file.
6. Configure the initial BootP/TFTP parameters as required, and then click Apply.
7. Reset the device; the cmp and Software License Key files are loaded to the device.
Version 6.6
If the Syslog server indicates that the Software License Key was
unsuccessfully loaded (i.e., the "SN_" line is blank), do the following
preliminary troubleshooting procedures:
1. Open the Software License Key file and check that the "S/N" line
appears. If it does not appear, contact AudioCodes.
2. Verify that you have loaded the correct file. Open the file and ensure that
the first line displays "[LicenseKeys]".
3. Verify that the content of the file has not been altered.
•
When loading the Software License Key file, a cmp file must also be
loaded during this BootP process.
•
For more information on using the AcBootP utility, refer to the document
AcBootP Utility User's Guide.
545
41. Software Upgrade
Mediant 3000