AudioCodes Mediant 3000 User Manual page 93

User's Manual
Parameter
Web: SNMP Manager
[SNMPManagerIsUsed_x
]
Web: IP Address
[SNMPManagerTableIP_
x]
Trap Port
[SNMPManagerTrapPort
_x]
Web: Trap User
[SNMPManagerTrapUser
]
Trap Enable
[SNMPManagerTrapSen
dingEnable_x]
Version 6.6
SNMP Trap Destinations Parameters Description
Enables the SNMP Manager to receive traps and checks the validity of
the configured destination (IP address and port number).

[0] (check box cleared) = (Default) Disables SNMP Manager

[1] (check box selected) = Enables SNMP Manager
Defines the IP address (in dotted-decimal notation, e.g., 108.10.1.255)
of the remote host used as the SNMP Manager. The device sends
SNMP traps to this IP address.
Defines the port number of the remote SNMP Manager. The device
sends SNMP traps to this port.
The valid value range is 100 to 4000. The default is 162.
Associates a trap user with the trap destination. This determines the
trap format, authentication level, and encryption level.

v2cParams (default) = SNMPv2 user community string

SNMPv3 user configured in 'Configuring SNMP V3 Users' on page
95
Activates the sending of traps to the SNMP Manager.

[0] Disable

[1] Enable (Default)
Description
93
6. SNMP-Based Management
Mediant 3000