AudioCodes Mediant 3000 User Manual page 781

User's Manual
Parameter
[ISDNIBehavior_x]
Web: General Call Control
Behavior
EMS: General CC Behavior
[ISDNGeneralCCBehavior]
Version 6.6
Identification IE to explicit Interface ID, even if the B-channel is
on the same trunk as the D-channel.
Note: This value is applicable only to 4/5ESS, DMS and NI-2
variants.

[32768] ACCEPT MU LAW =Mu-Law is also accepted in ETSI.

[65536] EXPLICIT PRES SCREENING = The calling party
number (octet 3a) is always present even when presentation
and screening are at their default.
Note: This option is applicable only to ETSI, NI-2, and 5ESS.

[131072] STATUS INCOMPATIBLE STATE = Clears the call
on receipt of Q.931 Status with incompatible state. Otherwise,
no action is taken (default).

[262144] STATUS ERROR CAUSE = Clear call on receipt of
Status according to cause value.

[524288] ACCEPT A LAW =A-Law is also accepted in 5ESS.

[2097152] RESTART INDICATION = Upon receipt of a Restart
message, acEV_PSTN_RESTART_CONFIRM is generated.

[4194304] FORCED RESTART = On data link (re)initialization,
send RESTART if there is no call.

[67108864] NS ACCEPT ANY CAUSE = Accept any Q.850
Cause IE from ISDN.
Note: This option is applicable only to Euro ISDN.

[536870912] Alcatel coding for redirect number and display
name is accepted by the device.
Note: This option is applicable only to QSIG (and relevant for
specific Alcatel PBXs such as OXE).

[1073741824] QSI ENCODE INTEGER = If this bit is set,
INTEGER ASN.1 type is used in operator coding (compliant to
new ECMA standards); otherwise, OBJECT IDENTIFIER
ASN.1 type is used.
Note: This option is applicable only to QSIG.

[2147483648] 5ESS National Mode For Bch Maintenance =
Use the National mode of AT&T 5ESS for B-channel
maintenance.
Notes:

To configure the device to support several ISDNIBehavior
features, enter a summation of the individual feature values.
For example, to support both [512] and [2048] features, set
the parameter ISDNIBehavior is set to 2560 (i.e., 512 + 2048).

When configuring in the Web interface, to select the options
click the arrow button and then for each required option select
1 to enable.
Same as the description for parameter ISDNIBehavior, but for a
specific trunk ID.
Bit-field for determining several general CC behavior options. To
select the options, click the arrow button, and then for each
required option, select 1 to enable. The default is 0 (i.e., disable).

[2] = Data calls with interworking indication use 64 kbps B-
channels (physical only).

[8] REVERSE CHAN ALLOC ALGO = Channel ID allocation
algorithm.

[16] = The device clears down the call if it receives a NOTIFY
781
53. Configuration Parameters Reference
Description
Mediant 3000