AudioCodes Mediant 3000 User Manual page 439

User's Manual
Notes:

To configure Allowed Coder Groups:
1. Open the Allowed Coders Group page (Configuration tab > VoIP menu > SBC >
Allowed Coders Group).
2. From the 'Allowed Coders Group ID' drop-down list, select an ID for the Allowed Coder
Group.
3. In the Coder Name table, select coders for the Allowed Coder Group.
4. Click Submit to apply your changes.
5. To save the changes to flash memory, see 'Saving Configuration' on page 520.
Version 6.6
•
Each coder can appear only once per Allowed Coder Group.
•
Allowed Coder Groups are applicable only to audio media.
•
Allowed Coder Groups can be assigned to IP Profiles (see 'Configuring
IP Profiles' on page 263).
•
The Allowed Coder Groups table can also be configured using the table
ini file parameter, AllowedCodersGroup.
Figure 29-3: Allowed Coders Group Page
439
29. SBC Configuration
Mediant 3000