13.2
Fax and Modem Capabilities
This section describes the device's fax and modem capabilities and corresponding
configuration. The fax and modem configuration is done in the Fax/Modem/CID Settings
page.
Notes:
To access the fax and modem parameters:
1.
Open the Fax/Modem/CID Settings page (Configuration tab > VoIP menu > Media
submenu > Fax/Modem/CID Settings).
2.
Configure the parameters, as required.
3.
Click Submit to apply your changes.
User's Manual
•
Unless otherwise specified, the configuration parameters mentioned in
this section are available on this page.
•
Some SIP parameters override these fax and modem parameters. For
example, the IsFaxUsed parameter and V.152 parameters in Section
'V.152 Support' on page 180).
•
For a detailed description of the parameters appearing on this page, see
'Configuration Parameters Reference' on page 643.
Figure 13-5: Fax/Modem/CID Settings Page
168
Mediant 3000
Document #: LTRT-89729