AudioCodes Mediant 3000 User Manual page 462

Parameter
Destination IP Group ID
[IPOutboundManipulati
on_DestIPGroupID]
Source Username Prefix
[IPOutboundManipulati
on_SrcUsernamePrefix
]
Source Host
[IPOutboundManipulati
on_SrcHost]
Destination Username
Prefix
[IPOutboundManipulati
on_DestUsernamePrefi
x]
Destination Host
[IPOutboundManipulati
on_DestHost]
Request Type
[IPOutboundManipulati
on_RequestType]
ReRoute IP Group ID
[IPOutboundManipulati
on_ReRouteIPGroupID]
Call Trigger
[IPOutboundManipulati
on_Trigger]
User's Manual
Defines the IP Group to where the INVITE is to be sent.
For any Destination IP Group, enter the value -1.
Defines the prefix of the source SIP URI user name (usually in the From
header).
For any prefix, enter the asterisk "*" symbol (default).
Note: The prefix can be a single digit or a range of digits. For available
notations, see 'Dialing Plan Notation for Routing and Manipulation' on
page 641.
Defines the source SIP URI host name - full name (usually in the From
header).
For any host name, enter the asterisk "*" symbol (default).
Defines the prefix of the destination SIP URI user name (usually in the
Request-URI).
For any prefix, enter the asterisk "*" symbol (default).
Note: The prefix can be a single digit or a range of digits. For available
notations, see 'Dialing Plan Notation for Routing and Manipulation' on
page 641.
Defines the destination SIP URI host name - full name (usually in the
Request URI).
For any host name, enter the asterisk "*" symbol (default).
Defines the SIP request type to which the manipulation rule is applied.

[0] All = (Default) all SIP messages.

[1] INVITE = All SIP messages except REGISTER and SUBSCRIBE.

[2] REGISTER = Only SIP REGISTER messages.

[3] SUBSCRIBE = Only SIP SUBSCRIBE messages.

[4] INVITE and REGISTER = All SIP messages except SUBSCRIBE.

[5] INVITE and SUBSCRIBE = All SIP messages except REGISTER.
Defines the IP Group that initiated (sent) the SIP redirect response (e.g.,
3xx) or REFER message. This parameter is typically used for re-routing
requests (e.g., INVITEs) when interworking is required for SIP 3xx
redirect responses or REFER messages.
The default is -1 (i.e., not configured).
Notes:

This parameter functions together with the 'Call Trigger' parameter
(see below).

For more information on interworking of SIP 3xx redirect responses or
REFER messages, see 'Interworking SIP 3xx Redirect Responses' on
page 420 and 'Interworking SIP REFER Messages' on page 423,
respectively.
Defines the reason (i.e, trigger) for the re-routing of the SIP request:

[0] Any = (Default) Re-routed for all scenarios (re-routes and non-re-
routes).

[1] 3xx = Re-routed if it triggered as a result of a SIP 3xx response.

[2] REFER = Re-routed if it triggered as a result of a REFER request.

[3] 3xx or REFER = Applies to options [1] and [2].

4] Initial only = Regular requests that the device forwards to a
destination. In other words, re-routing of requests triggered by the
462
Description
Document #: LTRT-89729
Mediant 3000