Note:
To configure Tel Profiles:
1.
Open the Tel Profile Settings page (Configuration tab > VoIP menu > Coders and
Profiles submenu > Tel Profile Settings).
2.
From the 'Profile ID' drop-down list, select the Tel Profile index.
3.
In the 'Profile Name' field, enter an arbitrary name that enables you to easily identify
the Tel Profile.
4.
From the 'Profile Preference' drop-down list, select the priority of the Tel Profile, where
1 is the lowest priority and 20 the highest. If both IP and Tel profiles apply to the same
User's Manual
Tel Profiles can also be configured using the table ini file parameter,
TelProfile (see 'Configuration Parameters Reference' on page 643)
Figure 18-3: Tel Profile Settings Page
262
Mediant 3000
Document #: LTRT-89729