Least Cost Routing Parameters - AudioCodes Mediant 3000 User Manual

User's Manual
Parameter
EMS: Redirect Number Map
Tel to IP
[RedirectNumberMapTel2I
P]
Phone Context Table
Web: Phone Context Table
EMS: SIP Manipulations >
Phone Context
[PhoneContext]
Web/EMS: Add Phone
Context As Prefix
[AddPhoneContextAsPrefi
x]

53.12 Least Cost Routing Parameters

The Least Cost Routing (LCR) parameters are described in the table below.
Parameter
Web: Routing Rule Groups
Table
[RoutingRuleGroups]
Version 6.6
[RedirectNumberMapTel2Ip]
FORMAT RedirectNumberMapTel2Ip_Index =
RedirectNumberMapTel2Ip_DestinationPrefix,
RedirectNumberMapTel2Ip_RedirectPrefix,
RedirectNumberMapTel2Ip_RemoveFromLeft,
RedirectNumberMapTel2Ip_RemoveFromRight,
RedirectNumberMapTel2Ip_LeaveFromRight,
RedirectNumberMapTel2Ip_Prefix2Add,
RedirectNumberMapTel2Ip_Suffix2Add,
RedirectNumberMapTel2Ip_IsPresentationRestricted,
RedirectNumberMapTel2Ip_SrcTrunkGroupID,
RedirectNumberMapTel2Ip_SrcIPGroupID;
[\RedirectNumberMapTel2Ip]
For example:
RedirectNumberMapTel2Ip 1 = *, *, 4, 0, 255, , , 255, -1, -1;
Note: For a description of this table, see 'Configuring Redirect Number
Manipulation' on page 342.
This table parameter configures the Phone Context table. This
parameter maps NPI and TON to the SIP 'phone-context' parameter,
and vice versa.
The format for this parameter is as follows:
[PhoneContext]
FORMAT PhoneContext_Index = PhoneContext_Npi,
PhoneContext_Ton, PhoneContext_Context;
[\PhoneContext]
For example:
PhoneContext 0 = 0,0,unknown.com
PhoneContext 1 = 1,1,host.com
PhoneContext 2 = 9,1,na.e164.host.com
Note: For a detailed description of this table, see 'Mapping NPI/TON to
SIP Phone-Context' on page 346.
Determines whether the received Phone-Context parameter is added as
a prefix to the outgoing ISDN Setup message withCalled and Calling
numbers.

[0] Disable (default)

[1] Enable
LCR Parameters
This table parameter enables the LCR feature and configures the
average call duration and default call cost. The default call cost
determines whether routing rules that are not configured with a Cost
Group are considered as a higher or lower cost route compared to
other matching routing rules that are assigned Cost Groups.
831
53. Configuration Parameters Reference
Description
Description
Mediant 3000