AudioCodes Mediant 3000 User Manual page 210

•
"PBX" (PBX:<PBX_number>): used to match a routing rule based on query
results of the PBX / IP PBX number (MSLDAPPBXNumAttributeName)
•
"MOBILE" (MOBILE:<mobile_number>): used to match a routing rule based on
query results of the mobile number (MSLDAPMobileNumAttributeName)
•
"LDAP_ERR": used to match a routing rule based on a failed query result when
no attribute is found in the AD
Note:
7. The device uses the Outbound IP Routing table to route the call based on the LDAP
query result. The device routes the call according to the following priority:
1. Private line: If the query is done for the private attribute and it's found, then the
device routes the call according to this attribute.
2. Mediation Server SIP address (Lync / OCS): If the private attribute does not
exist or is not queried, then the device routes the call to the Mediation Server
(which then routes the call to the Lync client).
3. PBX / IP PBX: If the Lync / OCS client is not found in the AD, it routes the call to
the PBX / IP PBX.
4. Mobile number: If the Lync / OCS client (or Mediation Server) is unavailable
(e.g., SIP response 404 "Not Found" upon INVITE sent to Lync client), and the
PBX / IP PBX is also unavailable, then the device routes the call to the user's
mobile number (if exists in the AD).
5. Alternative route: If the call routing to all the above fails (e.g., due to unavailable
destination - call busy), the device can route the call to an alternative destination
if an alternative routing rule is configured.
6. "Redundant" route: If the query failed (i.e., no attribute found in the AD), the
device uses the routing rule matching the "LDAP_ERR" prefix destination number
value.
Note:
User's Manual
These prefixes are involved only in the routing and manipulation processes;
they are not used as the final destination number.
For Enterprises implementing a PBX / IP PBX system, but yet to migrate to
Lync Server 2010, if the PBX / IP PBX system is unavailable or has failed, the
device uses the AD query result for the user's mobile phone number, routing
the call through the PSTN to the mobile destination.
210
Mediant 3000
Document #: LTRT-89729