Viewing Ha Status On Home Page; Mediant - AudioCodes Mediant 3000 User Manual

User's Manual
37

Viewing HA Status on Home Page

When the device is configured for HA mode, the Home page displays the chassis with two
VoIP blades (TP-6310 or TP-8410) and two SA/M3K Alarms, Status and Synchronization
("SAT") blades, as shown in the figure below:
The status of the HA mode is indicated in the General Information pane:

'High Availability' field:

"Operational": device is in HA mode

"Synchronizing": device is synchronizing (temporary state, after which it changes to
Operational if successful)

"Stand Alone": device is in Simplex mode

"Not Available": HA is not configured

"Not Operational": HA is not supported

"Not Operational: Load from Boot": device is loading from BootP

"Not Operational: Global IP Not Defined": Global IP address is not configured

"Operational: Internal Error": Internal error in HA mode

"Operational: SA Card Error": Malfunction in SAT blade

"Operational: RTM Card Error": Malfunction in RTM blade
Version 6.6
Figure 37-1: Home Page for Mediant 3000 HA Device
37. Viewing HA Status on Home Page
513

Mediant 3000