User's Manual
3
Introduction
This part provides an overview of the various management tools that can be used to
configure the device. It also provides step-by-step procedures on how to configure the
management settings.
The following management tools can be used to configure the device:
Embedded HTTP/S-based Web server - see 'Web-based Management' on page
Command Line Interface (CLI) - see 'CLI-Based Management' on page
AudioCodes Element Management System - see EMS-Based Management on page
97
Simple Network Management Protocol (SNMP) browser software - see 'SNMP-Based
Management' on page
Configuration ini file - see 'INI File-Based Management' on page
Notes:
Version 6.6
91
•
Some configuration settings can only be done using a specific
management tool. For example, some configuration can only be done
using the Configuration ini file method.
•
Throughout this manual, where a parameter is mentioned, its
corresponding Web, CLI, and ini parameter is mentioned. The ini file
parameters are enclosed in square brackets [...].
•
For a list and description of all the configuration parameters, see
'Configuration Parameters Reference' on page 643.
43
3. Introduction
45
81
99
Mediant 3000