Step 5: Configure The Ip Groups - AudioCodes Mediant 3000 User Manual

d. In the 'Enable Proxy Keep Alive' drop-down list, select "Using Options", and then
in the 'Proxy Load Balancing Method' drop-down list, select Round Robin.
4. Configure Proxy Set ID #3 for the IP-PBX:
a. From the 'Proxy Set ID' drop-down list, select 3.
b. In the 'Proxy Address' column, enter the IP address of the IP-PBX (e.g.,
"10.15.4.211").
c. From the 'Transport Type' drop-down list corresponding to the IP address entered
above, select UDP".
d. In the 'Enable Proxy Keep Alive' drop-down list, select Using Options. This is
used in Survivability mode for remote IP-PBX users.

20.2.5 Step 5: Configure the IP Groups

This step describes how to create the IP Groups for the following entities in the network:

ITSP-A SIP trunk

ITSP-B SIP trunk
User's Manual
Figure 20-9: Proxy Set ID #2 for ITSP-B
Figure 20-10: Proxy Set ID #3 for the IP-PBX
288
Mediant 3000
Document #: LTRT-89729