User Information File; User Information File For Pbx Extensions And "Global" Numbers - AudioCodes Mediant 3000 User Manual

The Dial Plan index used in the Dial Plan file for this feature is defined by the
Tel2IPSourceNumberMappingDialPlanIndex parameter.
An example of such a configuration in the Dial Plan file is shown below:
[ PLAN1 ]
; specific received number changed to 04343434181.
0567811181,0,04343434181
; number range that changes to 04343434181.
056788118[2-4],0,04343434181
If we take
"0567811181,0,04343434181"), the received Calling Number Party of 0567811181 is
changed to 04343434181 and sent to the IP with a SIP INVITE as follows:
Via: SIP/2.0/UDP 211.192.160.214:5060;branch=z9hG4bK3157667347
From: <sip:04343434181@kt.co.kr:5060>;tag=de0004b1
To: sip:01066557573@kt.co.kr:5060
Call-ID: 585e60ec@211.192.160.214
CSeq: 1 INVITE
Contact:<sip:04343434181@211.192.160.214:5060;transport=udp>
The initial Dial Plan text file must be converted to *.dat file format using the DConvert utility.
This is done by clicking the DConvert's Process Dial Plan File button. For more
information, refer to DConvert Utility User's Guide.
You can load this *.dat file to the device using the Web interface (see 'Loading Auxiliary
Files' on page 525), AcBootP utility, or using the Auto-update mechanism from an external
HTTP server.
Notes:

41.1.5 User Information File

This section describes the various uses of the User Info file.
You can load the User Info file using any of the following methods:

Web interface (see 'Loading Auxiliary Files' on page 525)

ini file - using the UserInfoFileName parameter, e.g., UserInfoFileName =
'UserInformationFile.txt' (see 'Auxiliary and Configuration File Name Parameters' on
page 855)

Automatic update mechanism - using the UserInfoFileURL parameter, e.g.,
UserInfoFileUrl = 'http://192.168.0.250/Audiocodes/ UserInformationFile.txt' (see
'Automatic Update Mechanism' on page 553)

41.1.5.1 User Information File for PBX Extensions and "Global" Numbers

The User Info file contains a User Info table that can be used for the following Gateway-
related:

Mapping (Manipulating) PBX Extension Numbers with Global Phone Numbers:
maps PBX extension number, connected to the device, with any "global" phone
User's Manual
the first Dial
•
Tel-to-IP routing is performed on the original source number if the
parameter 'Tel to IP Routing Mode' is set to 'Route calls before
manipulation'.
•
Tel-to-IP routing is performed on the modified source number as defined
in the Dial Plan file, if the parameter 'Tel To IP Routing Mode' is set to
'Route calls after manipulation'.
•
Source number Tel-to-IP manipulation is performed on the modified
source number as defined in the Dial Plan file.
Plan rule in the
536
Mediant 3000
example above (i.e.,
Document #: LTRT-89729