AudioCodes Mediant 3000 User Manual page 136


To add remote NFS file systems:
1. Open the Application Settings page (Configuration tab > System menu >
Application Settings).
2. Under the 'NFS Settings' group, click the NFS Table
appears.
3. Click the Add button; the Add Record dialog box appears:
4. Configure the NFS parameters according to the table below.
5. Click the Submit button; the remote NFS file system is immediately applied, which
can be verified by the appearance of the 'NFS mount was successful' message in the
Syslog server.
6. To save the changes to flash memory, see 'Saving Configuration' on page 520.
Notes:
Parameter
Index
Host Or IP
[NFSServers_HostOrIP]
Root Path
[NFSServers_RootPath]
NFS Version
User's Manual
Figure 11-9: Add Record Dialog Box for NFS
•
To avoid terminating current calls, a row must not be deleted or modified
while the device is currently accessing files on that remote NFS file
system.
•
The combination of 'Host Or IP' and 'Root Path' must be unique for each
row in the table. For example, the table must include only one row with a
Host/IP of 192.168.1.1 and Root Path of /audio.
•
The NFS table can also be configured using the table ini file parameter
NFSServers (see 'NFS Parameters' on page 649)
NFS Settings Parameters
The row index of the remote file system.
The valid range is 1 to 16.
The domain name or IP address of the NFS server. If a domain name
is provided, a DNS server must be configured.
Path to the root of the remote file system in the format: /[path]. For
example, '/audio'.
NFS version used to access the remote file system.
Description
136
Mediant 3000
button; the NFS Table page
Document #: LTRT-89729