Viewing Nfas Groups And D-Channel Status - AudioCodes Mediant 3000 User Manual

User's Manual
6. To view detailed information on a specific trunk's channel, click the required channel
icon; the Basic Channel Information page appears, displaying information under the
Basic tab (displayed in green):
To view additional channel information, click the required tab (SIP, RTP/RTCP, and
Voice Settings).
7. To view the settings of a specific trunk, click the required trunk icon, and then from the
shortcut menu, choose Port Settings; the Trunk Settings page opens, displaying the
trunk's settings. If needed, you can modify the settings (see 'Configuring Trunk
Settings' on page 297).
47.2

Viewing NFAS Groups and D-Channel Status

The NFAS Group & D-Channel Status page displays the status of the device's D-channels
and NFAS groups. The status of a D-channel and NFAS group can be "In Service" or "Out
of Service". This page also indicates whether the D-channel is a primary or backup D-
channel.
This page also enables you to manually switchover between active and standby D-
channels belonging to the same NFAS group. This is done using the Switch Activity
button. For more information, see 'Performing Manual D-Channel Switchover in NFAS
Group' on page 316.
Note:

To view the status of the D-channels and NFAS groups:

Open the NFAS Group & D-Channel Status page (Status & Diagnostics tab > VoIP
Status menu > NFAS Group & D-Channel Status).
Version 6.6
Figure 47-2: Basic Channel Information Page
This page is applicable only to T1 ISDN protocols supporting NFAS, and only
if the NFAS group is configured with two D-channels.
Figure 47-3: NFAS Group & D-Channel Status Page
581
47. VoIP Status
Mediant 3000