TFTP during device startup. If the ini file does not contain a specific auxiliary file type,
the device uses the last auxiliary file of that type that was stored on its non-volatile
memory.
Notes:
The procedure below describes how to load Auxiliary files using the Web interface.
To load auxiliary files to the device using the Web interface:
1.
Open the Load Auxiliary Files page (Maintenance tab > Software Update menu >
Load Auxiliary Files).
Note:
User's Manual
•
You can schedule automatic loading of updated auxiliary files using
HTTP/HTTPS, FTP, or NFS. For more information on automatic updates,
see 'Automatic Update' on page 553.
•
Auxiliary file upload through TFTP is not supported by HA mode.
•
When loading an ini file using this Web page, parameters that are
excluded from the loaded ini file retain their current settings
(incremental).
•
Saving an auxiliary file to flash memory may disrupt traffic on the device.
To avoid this, disable all traffic on the device by performing a graceful
lock as described in 'Locking and Unlocking the Device' on page 519.
•
For deleting auxiliary files, see 'Viewing Device Information' on page 567.
The appearance of certain file load fields depends on the installed Software
License Key.
526
Mediant 3000
Document #: LTRT-89729