AudioCodes Mediant 3000 User Manual page 85

User's Manual
Command Short Format
SHow TDM sh tdm
sh dsp
SHow DSP
SHow IP sh ip
SHow LOG sh log
Example:
/>sh info
Board type: gateway SDH, firmware version 6.60.000.020
Uptime: 0 days, 0 hours, 3 minutes, 54 seconds
Memory usage: 63%
Temperature reading: 39 C
Last reset reason:
Board was restarted due to issuing of a reset from Web interface
Reset Time : 7.1.2012 21.51.13
/>sh tdm status
Trunk 00: Active
Trunk 01: Active
Trunk 02: Not Configured
/>sh tdm perf
DS1 Trunk Statistics (statistics for 948 seconds):
Trunk # B-Channel Call count RTP packet RTP packet Activity
utilization
0 1
1 20
2 0
3 0
/>sh dsp status
DSP firmware: 491096AE8 Version:0660.03 Used=0 Free=480 Total=480
DSP device 0: Active
DSP device 1: Active
DSP device 2: Active
DSP device 3: Active
DSP device 4: Active
DSP device 5: Active
DSP device 6: Inactive
DSP device 7: Inactive
DSP device 8: Inactive
DSP device 9: Inactive
DSP device 10: Inactive
DSP device 11: Inactive
DSP device 12: Active
DSP device 13: Active
DSP device 14: Active
Version 6.6
Arguments
status | perf |
summary
status | perf
conf | perf |
route
[stop]
Tx Rx
1 2865 0
20 149743
0 0 0 0
0 0 0
Used=16 Free= 0 Total=16
Used=16 Free= 0 Total=16
Used=16 Free= 0 Total=16
Used=16 Free= 0 Total=16
Used=16 Free= 0 Total=16
Used=16 Free= 0 Total=16
Used=16 Free= 0 Total=16
Used=16 Free= 0 Total=16
Used=16 Free= 0 Total=16
Displays the alarm status and performance
statistics for E1/T1 trunks.
Displays status and version for each DSP
device, along with overall performance
statistics.
Displays IP interface status and configuration,
along with performance statistics.
Note: The display format may change
according to the configuration.
Displays (or stops displaying) Syslog messages
in the CLI session.
Seconds
57
0 3017
0
85
5. CLI-Based Management
Description
Mediant 3000