Step 8: Configure Inbound Ip Routing - AudioCodes Mediant 3000 User Manual

c. Click Submit.
6. Configure Profile ID #2 for the ITSP's:
a. From the 'Profile ID' drop-down list, select 2.
b. From the 'Coder Group' drop-down list, select Coder Group 2.
c. Click Submit.

20.2.8 Step 8: Configure Inbound IP Routing

This step defines how to configure the device for routing inbound (i.e., received) IP-to-IP
calls. The table in which this is configured uses the IP Groups that you defined in 'Step 5:
Configure the IP Groups' on page 288.

To configure inbound IP routing:
1. Open the Inbound IP Routing Table page (Configuration tab > VoIP menu > GW and
IP to IP submenu > Routing submenu > IP to Trunk Group Routing).
User's Manual
Figure 20-14: Defining IP Profile ID 1
Figure 20-15: Defining Inbound IP Routing Rules
292
Mediant 3000
Document #: LTRT-89729