Configuring Radius Settings - AudioCodes Mediant 3000 User Manual
Enterprise session border controller / voip digital media gateway
Hide thumbs
Also See for Mediant 3000:
- User manual (1070 pages) ,
- Installation manual (90 pages) ,
- Hardware installation manual (88 pages)
Table of Contents
Advertisement
User's Manual
4.8
Configuring RADIUS Settings
The RADIUS Settings page is used for configuring the Remote Authentication Dial In User
Service (RADIUS) accounting parameters. For a description of these parameters, see
'Configuration Parameters Reference' on page 643.
To configure RADIUS:
1.
Open the RADIUS Settings page (Configuration tab > System menu > Management
submenu > RADIUS Settings).
2.
Configure the parameters as required.
3.
Click Submit to apply your changes.
4.
To save the changes to flash memory, see 'Saving Configuration' on page 520.
Version 6.6
Figure 4-32: RADIUS Parameters Page
79
4. Web-Based Management
Mediant 3000
Advertisement
Table of Contents
Troubleshooting
