User's Manual
The handling of LDAP queries with the LDAP cache is shown in the flowchart below:
Figure 14-2: LDAP Query Process with Local LDAP Cache
The LDAP Settings page is used for configuring the LDAP cache parameters.
Notes:
Version 6.6
•
The LDAP cache parameters are available only if you have enabled the
LDAP service (see 'Configuring the LDAP Server' on page 205).
•
If on the first LDAP query, the result fails for at least one attribute and is
successful for at least one, the partial result is cached. However, for
subsequent queries, the device does not use the partially cached result,
but does a new query with the LDAP server again.
•
For a full description of the cache parameters, see 'Configuration
Parameters Reference' on page 643.
207
14. Services
Mediant 3000