Gateway With Sas Redundant Mode - AudioCodes Mediant 3000 User Manual

User's Manual

31.4.2 Gateway with SAS Redundant Mode

The procedure below describes how to configure the Gateway application with SAS
redundant mode.

To configure Gateway application with SAS redundant mode:
1. Define the proxy servers for the Gateway application:
a. Open the Proxy & Registration page (Configuration tab > VoIP menu > SIP
Definitions submenu > Proxy & Registration).
b. From the 'Use Default Proxy' drop-down list, select Yes.
Figure 31-6: Enabling Proxy Server for Gateway Application
c. Click Submit.
d. Open the Proxy Sets Table page (Configuration tab > VoIP menu > Control
Network submenu > Proxy Sets Table).
e. From the 'Proxy Set ID' drop-down list, select 0.
f. In the first 'Proxy Address' field, enter the IP address of the external proxy server.
g. In the second 'Proxy Address' field, enter the IP address and port of the device (in
the format x.x.x.x:port). This is the same port as defined in the 'SAS Local
UDP/TCP/TLS Port' field (see 'Configuring Common SAS Parameters' on page
475).
h. From the 'Proxy Redundancy Mode' drop-down list, select Homing.
Figure 31-7: Defining Proxy Servers for Gateway Application
i. Click Submit.
Version 6.6 481
31. SAS Configuration
Mediant 3000