Configuring Ad-Based Routing Rules - AudioCodes Mediant 3000 User Manual

User's Manual
The flowchart below summarizes the device's process for querying the AD and routing the
call based on the query results:
Note:

14.1.3.2 Configuring AD-Based Routing Rules

The procedure below describes how to configure Tel-to-IP routing based on LDAP queries.

To configure LDAP-based Tel-to-IP routing for Lync Server 2010:
1. Configure the LDAP server parameters, as described in 'Configuring the LDAP Server'
on page 205.
2. Configure the AD attribute names used in the LDAP query:
Version 6.6
Figure 14-4: LDAP Query Flowchart
If you are using the device's local LDAP cache, see 'Configuring the Device's
LDAP Cache' on page 206 for the LDAP query process.
211
14. Services
Mediant 3000