AudioCodes Mediant 3000 User Manual page 568


To view Ethernet port information:

Open the Ethernet Port Information page (Status & Diagnostics tab > System
Status menu > Ethernet Port Information).
When Physical Network Separation is enabled on Mediant 3000 with TP-8410 (using the
parameter EnableNetworkPhysicalSeparation - see Networking Parameters on page 643),
the Ethernet Port Information page displays the ports for the Control, OAMP, and Media
network interfaces, as shown below:
Figure 44-1: Ethernet Port Page for Physical Network Separation (Mediant 3000 with TP-8410)
The different Ethernet ports are located on the Mediant 3000 chassis as follows:

Control: Port 1A - bottom PEM module; Port 1B - top PEM module.

OAMP: Port 2A - bottom PEM module; Port 2B - top PEM module.

Media: Port 1 and Port 2 are located on the RTM-8410 blade.
Parameter
Active Port
Port Duplex Mode
Port Speed
User's Manual
Ethernet Port Information Parameters
Displays the active Ethernet port (1 or 2).
Displays whether the port is in half or duplex mode.
Displays the speed (in Mbps) of the Ethernet port.
Description
568
Mediant 3000
Document #: LTRT-89729