AudioCodes Mediant 3000 User Manual page 38

c. Open the IP Interface Settings screen - in the Navigation pane, click the device
name, and then VoIP, Network, IP Interface Settings.
d. In the table, select the OamAndMediaAndControl interface row, and then in the
Configuration pane, click IP interface Settings; the IP Interface Settings frame
opens.
e. Define the global IP address. The global IP address must be a unique address
that resides in the same subnet as the private IP addresses that were assigned to
the blades.
f. Click Apply and close the active window.
7. Click the Home button, and then on the Actions bar, click the Reset button to reset the
device. Ensure that the 'Burn Configuration into Flash Memory' check box is selected.
8. In the MG Tree, under the Region that you added, right-click the device, and then from
the shortcut menu, choose Remove MG to delete it from the EMS.
9. Add once again the Mediant 3000 under your Region to the EMS with the new global
IP address that you defined above.
User's Manual
Figure 2-10: IP Interface Settings Table
Figure 2-11: IP Interface Settings Frame
38
Mediant 3000
Document #: LTRT-89729