AudioCodes Mediant 3000 User Manual page 458


To configure IP-to-IP inbound manipulation rules:
1. Open the IP to IP Inbound Manipulation page (Configuration tab > VoIP menu > SBC
> Manipulations SBC > IP to IP Inbound).
2. Click the Add button; the following dialog box appears:
Figure 29-12: IP to IP Inbound Manipulation Page
3. Configure a rule as required. For a description of the parameters, see the table below.
4. Click Submit.
IP to IP Inbound Manipulation Parameters Description
Parameter
Matching Characteristics (Rule)
Additional Manipulation
[IPInboundManipulatio
n_IsAdditionalManipula
tion]
Manipulation Purpose
[IPInboundManipulatio
n_ManipulationPurpos
e]
User's Manual
Determines whether additional SIP URI user part manipulation is done
for the table entry rule listed directly above it.

[0] No = (Default) Regular manipulation rule (not done in addition to
the rule above it).

[1] Yes = If the above row entry rule matched the call, consider this
row entry as a match as well and perform the manipulation specified
by this rule.
Note: Additional manipulation can only be done on a different SIP URI,
source or destination, to the rule configured in the row above as
configured by the 'Manipulated URI' parameter (see below).
Defines the purpose of the manipulation:

[0] Normal = (Default) Inbound manipulations affect the routing input
and source and/or destination number.

[1] Routing input only = Inbound manipulations affect the routing input
only, retaining the original source and destination number.

[2] Shared Line = Used for the Shared-Line Appearance feature. This
manipulation is for registration requests to change the destination
number of the secondary extension numbers to the primary
458
- Add Dialog Box
Description
Document #: LTRT-89729
Mediant 3000