AudioCodes Mediant 3000 User Manual page 844

Enterprise session border controller / voip digital media gateway
Hide thumbs Also See for Mediant 3000:
Table of Contents

Advertisement

Parameter
[Classification]
Condition Table
Web: Condition Table
[ConditionTable]
SBC IP-to-IP Routing Table
Web: IP-to-IP Routing Table
EMS: IP to IP Routing
[IP2IPRouting]
SBC Alternative Routing Reasons Table
Web: SBC Alternative
Routing Reasons
EMS: Alternative Routing
Reasons
[SBCAlternativeRoutingRe
asons]
User's Manual
this parameter is as follows:
[ Classification ]
FORMAT Classification_Index = Classification_MessageCondition,
Classification_SrcSRDID, Classification_SrcAddress,
Classification_SrcPort, Classification_SrcTransportType,
Classification_SrcUsernamePrefix, Classification_SrcHost,
Classification_DestUsernamePrefix, Classification_DestHost,
Classification_ActionType, Classification_SrcIPGroupID;
[ \Classification ]
For example:
Classification 1 = 1, , 10.8.6.15, 5060, 2, *, *, *, *, 1, 4;
Note: For a detailed description of this table, see 'Configuring
Classification Rules' on page 440.
This table parameter configures Condition rules for SIP messages
using the same syntax as used in the SIP Message Manipulation
table. These Condition rules are later assigned to Classification rules
in the Classification table for enhancing the process of classifying
incoming SIP dialogs to an IP Groups.
[ ConditionTable ]
FORMAT ConditionTable_Index = ConditionTable_Condition,
ConditionTable_Description;
[ \ConditionTable ]
Note: For a detailed description of this table, see 'Configuring
Condition Rules' on page 445.
This table parameter configures the SBC IP-to-IP Routing table for
routing incoming SIP messages such as INVITE messages to an IP
destination. The format of this parameter is as follows:
[IP2IPRouting]
FORMAT IP2IPRouting_Index = IP2IPRouting_SrcIPGroupID,
IP2IPRouting_SrcUsernamePrefix, IP2IPRouting_SrcHost,
IP2IPRouting_DestUsernamePrefix, IP2IPRouting_DestHost,
IP2IPRouting_RequestType, IP2IPRouting_MessageCondition,
IP2IPRouting_ReRouteIPGroupID, IP2IPRouting_Trigger,
IP2IPRouting_DestType, IP2IPRouting_DestIPGroupID,
IP2IPRouting_DestSRDID, IP2IPRouting_DestAddress,
IP2IPRouting_DestPort, IP2IPRouting_DestTransportType,
IP2IPRouting_AltRouteOptions, IP2IPRouting_CostGroup;
[ \IP2IPRouting ]
For example:
IP2IPRouting 1 = -1, *, *, *, *, 0, , -1, 0, 0, 1, , , 0, -1, 0,;
Note: For a detailed description of this table, see 'Configuring SBC
IP-to-IP Routing' on page 446.
This table parameter configures the SBC Alternative Routing
Reasons table. This table is used for alternative IP-to-IP routing. If
4xx, 5xx, or 6xx SIP responses are received as a result of outgoing
SIP dialog-initiating methods (e.g., INVITE, OPTIONS, and
SUBSCRIBE messages), the device re-sends the messages to an
alternative route if the response is defined in this table and if there
844
Description
Document #: LTRT-89729
Mediant 3000

Advertisement

Table of Contents
loading

Table of Contents