AudioCodes Mediant 3000 User Manual page 228

Note:

To configure the SIP Interface table:
1. Open the SIP Interface Table page (Configuration tab > VoIP menu > Control
Network submenu > SIP Interface Table).
2. Click the Add button; the following dialog box appears:
3. Click Submit to apply your settings.
Parameter
Network Interface
[SIPInterface_NetworkI
nterface]
Application Type
[SIPInterface_Applicati
onType]
UDP Port
[SIPInterface_UDPPort]
User's Manual
The SIP Interface table can also be configured using the table ini file
parameter, SIPInterface.
SIP Interface Table Parameters
Defines the Control-type IP network interface that you want to associate
with the SIP Interface. This value string must be identical (including
case-sensitive) to that configured in the 'Interface Name' field of the
Multiple Interface table (see 'Configuring IP Network Interfaces' on page
116).
The default is not configured.
Note: SIP Interfaces that are assigned to a specific SRD must be
defined with the same network interface. For example, if you define three
SIP Interfaces for SRD ID #8, all these SIP Interfaces must be defined
with the same network interface (e.g., "SIP1").
Defines the application type associated with the SIP Interface.

[0] GW/IP2IP (default) = Gateway / IP-to-IP application.

[1] SAS = Stand-Alone Survivability (SAS) application.

[2] SBC = SBC application.
Defines the listening and source UDP port.
The valid range is 1 to 65534. The default is 5060.
Notes:

This port must be outside of the RTP port range.
Description
228
Mediant 3000
Document #: LTRT-89729