Removing Clamp Bracket (Ptt Or Gas Assistant Model); Removing Clamp Bracket (Mechanical Tilt Model) - TOHATSU MFS25 Service Manual

Put grease through grease nipple 0 until grease leaks from
6.
bushing (upper) c.
12) Removing Clamp Bracket
(PTT or Gas Assistant Model)
1. Remove PTT unit or gas shock absorber. Refer to
"Removing PTT Unit/Gas Shock Absorber" described later in
this chapter.
Remove nylon nut 1, and then, clamp bracket 2 and swivel
2.
bracket 3.
Remove shaft 5 from clamp bracket 4.
3.
Remove trim sensor 6.
4.
13) Removing Clamp Bracket
(Mechanical Tilt Model)
Remove thrust rod 1.
1.
Remove nylon nut 2 and nut 3, and then, clamp bracket 4
2.
and swivel bracket 5.
Remove shaft 7 and distance piece 8 from clamp bracket 6.
3.
25/30 2006
c
0
OBM OBM
OBM
5
6
4
2
7
1
6
3
8
3
1
7
5
4
2
7-21