TOHATSU MFS25 Service Manual page 69

Attach throttle cable q.
8.
(Tiller Handle Model)
• Put throttle cable q on the throttle drum 1 and attach it to
throttle cable bracket 8.
• Adjust position of lock nut w of throttle cable q so that
throttle grip can reach full open and full close positions.
Adjust cable tension so that it moves
approximately 1mm when pushed lightly with a
finger.
Set remote control lever e to neutral (N) g, and check that
9.
neutral throttling lever r is at full close position f.
(Remote Control Model)
Set shift arm t to forward (F), neutral (N), reverse (R) and
10.
then to neutral (N) positions.
(Remote Control Model)
Set throttle drum 1 to full close position.
11.
(Remote Control Model)
Check that throttle valve contacts with full close
stopper.
25/30 2006
w
1
c
q
w
8
g
h
e
N
R
1
d
d
c
3
e
f
r
t
F
3-21