TOHATSU MFS25 Service Manual page 241

7. Reverse connection of PTT motor lead wires to battery
terminals to fully stretch tilt rod.
Tilt Rod PTT Motor Lead Wires
Stretch
• Repeat above steps several times to move up
and down tilt rod (When reversing motor lead
wire connection, keep the connection open for
two or three seconds.).
• If tilt rod does not move smoothly when
connected to battery, assist the movement
with hand.
8. Check fluid level with tilt rod fully stretched. Add
recommended PTT fluid to specified level if it is lacking.
Recommended PTT Fluid :
OIL
ATF DEXRON III
25/30 2006
Battery Terminals
Blue (L)
+ : Positive Terminal
Green (G) – : Negative Terminal
L
G
7
7-31