TOHATSU MFS25 Service Manual page 307

Set remote control lever 4 to neutral (N) c, and check that
4.
neutral throttling lever 5 is at full close position b.
Set shift arm 6 to forward (F), neutral (N), reverse (R) and
5.
then to neutral (N) positions.
Set throttle drum 7 to full close position.
6.
Check that throttle valve contacts with full close
stopper.
Adjust screw-in length of cable joint 8 so that hole of cable
7.
joint is brought to shift arm pin 9.
Screw-in remote control cable joint at lease
10mm e.
After adjusting remote control cable joint, fix it
with remote control cable fully pushed in.
25/30 2006
WARNING
c
d
4
N
R
7
9
8
8
e
a
b
5
6
F
10
0
10-3