Installation Of Clamp Bracket And Drive Shaft Housing - TOHATSU MFS 4D Service Manual

Bracket Bracket
3 ) Installation of Clamp Bracket and
Drive Shaft Housing
Install tilt stopper 1 to swivel bracket (A).
1.
Apply grease to sliding areas of tilt stopper.
2. Install clamp bracket to swivel bracket (A).
Apply grease to both sides of washer 2.
OBM
OBM OBM
Install distance plate 3 to clamp bracket.
3.
Install thrust bushing 5, thrust place 6, steering
4.
bushings 7 and 8 and friction plate 9 on the drive shaft
housing 4.
7-14
1 1
2 2
OBM OBM OBM OBM
OBM OBM
5
7
9
8
6
3 3
4
4st 4/5/6 2020